Canada ride- Part I

Okay, so I feel pretty guilty about not posting anything in the last six or so months.

The Canada trip was bittersweet. I saw a lot of cool things and actually rode my bike to a foreign country, but 70% of it was ridden in really cold rain. It rained the entire way to Minneapolis, it rained on the way to Duluth, it rained (a little) on the way to Thunder Bay, it rained (a little) on the way to White River, it rained the entire way from White River to the US border, it did not rain from St. Ignace to Flint, but did rain halfway from Flint to Chicago. And then it rained the entire way from Chicago back to Iowa.

So we started off heading up towards Dubuque. We crossed the border into Wisconsin and followed the border a bit and then crossed back into Iowa because my dad got lost. As soon as we crossed back into Iowa it started pouring, but it was okay because we had our rain gear on for warmth earlier anyway. At about 3pm 60 miles south of Rochester, MN the CX had a major meltdown.

During the hardest rainfall I had ever ridden in, I experienced a feeling that was similar to running out of gas when I forget to put it on reserve. The bike loses power, falls behind and sputters as I move into the slow lane to turn on the reserve and speed up. It takes about 30 seconds to kick in and bring me back up to speed, but this time doing so didn't help. I had ridden about 70 miles already, which (depending on the conditions) is when I should usually switch over to reserve anyway. It was still sputtering and revving and demanded that I quickly downshift and turn it off. I did that and sat there for a minute, and then I started the bike back up again. It hesitated but eventually started and idled fine. My dad was about 7 miles ahead of me before he realized I had pulled over (despite my honking and light flickering) and had no remedy for the situation so I got back on and rode it for another 20 miles until it did it again. The rain was coming down in sheets now and was starting to collect on roads in every small town we pulled into, but as soon as the heavy rain subsided, the bike ran fine. When we got to Rochester we pulled the fuel line and put an entire new tank of gas in it (thinking water got into the fuel and fouled it) and then it ran like usual all the way through the busy Minneapolis traffic to our destination.

The next day we departed Minneapolis and headed towards Duluth in partly cloudy skies. It eventually started to rain 100 miles out but after a really boring ride up north we arrived in Duluth where it was nice and sunny. Duluth is pretty scenic and seems like a fun town, but there's a lot of homeless people and nomads with backpacks running around because its pretty much the end of the line for Minnesota. After visiting the cool locomotive station there, we headed up to Hibbing, MN where my next problem arose.


The Duluth area has some of the crappiest roads I've ever ridden on. Super bumpy with tons of potholes. We took a really bad side road to get to Hibbing, where I lost my luggage.
Losing something that's been sitting behind you and providing you with a back rest for the last 400 miles is a surreal feeling. It was a brand new expensive waterproof duffel bag that had all of my clothes and electronics accessories stuffed in it. It had been wrapped down nicely with about 4 bungee cords so I thought it would have been fine, but as soon as I heard the bungees banging against the side of the bike and scratching my sidecovers (and potentially getting into the spokes of my rear wheel) I freaked out and cautiously pulled over immediately. After meeting back up with my dad, we combed a 30 mile stretch of road for an hour and a half, burning daylight and looking for my missing bag. In that hour and a half about 5 cars went down that road coming from Hibbing like us, and I'm sure one of those cars stole my bag. I went back looking for it right away and still couldn't find it. I called the local Sheriffs office (where they didn't do anything about it, of course) and went to Wal Mart (ugh) and blew $100 replacing everything I lost.

Lessons learned: Be more obsessive-compulsive about your bungee cords. Pull over when you rode through a bumpy road and re-tighten everything. Put a card in your luggage with your name and address on it. Make your luggage visible in case it gets thrown into a ditch.

After that and spending a night creeping the NE MN "lost and found" section on CraigsList and talking to local authorities, we left for International Falls for the monumental border crossing.

It was possibly the easiest border crossing ever. My dad went in first and handed the officer his passport and told him I was with him on a trip and the guy waved me through and didn't even ask for my passport. I stopped at the window anyway to hand it to him just to be sure but he just shook his head and told me to have fun. I had my first taste of Vietnamese food in town (A+) in town there and then crossed a series of bridges from island-to-island to get on the main road to start going across Canada.




Continued in Part II.

Recovery.

So Sunday my dad and I drove up to Urbana to fix and retrieve my bike. We rolled in at 9:00am sharp and after coffee and chatting, we got to work on the bike at 9:30. Rolled the bike into Tom's air conditioned part of the garage and took off the tank, seat and grip and loosened up the carbs so we could get at the cable connections. There's really no room in there, so it took awhile. Finished the job at around 12, and I was shocked at the results. The throttle response was really quick and not loose and slow like it used to be. There was way too much slack in the cable, and by the looks of it, it was going to snap on the road anyway.

So we put back on the tank and seat and put it all together and took it out into the driveway for a test ride. It took longer than usual to warm up with the choke on, and when I turned off the choke...so did the bike. The bike would not run without the choke on, which is unusual and just not good for the engine. I took it out on the gravel road about half a mile to go through the gears, and it worked fine until I noticed that the bumpy terrain was making the choke work its way down to the bottom, eventually shutting it off. We took it back to the garage and after tinkering with it for about an hour, decided that the rubber intake ports were cracked through and were leaking air. We sealed them up the best we could with electrical tape, and as long as we kept the engine going and giving it throttle, it would run. If I come to a stop sign and let go of the throttle, it'll turn the bike off at the stop sign. I decided the job of riding the bike home should be left to the elder rider with over 35 years of riding experience, and he was cool with it.


We only got 4 miles before the battery died at a stop sign.
Battery!? We didn't even TOUCH it!
So I got out of the car and pushed my dad for about 1/5th of a mile on gravel so he could bump start it. We got back to the garage, diagnosed the problem, and realized that the battery connections were really loose. A quick fix with a screwdriver and we were back on the road. This time we made it home with no problems.

Grant Wood's "American Gothic" painted on a barn Along Rt. 30 near Mt. Vernon, IA

The next day, we took a look at the carbs for leaks, and found bad O-rings and replaced them. Took off the electrical tape from the boots and replaced it with a sealant, adjusted the idle and it works great now! We found like 5 problems we had to fix in one week, which I guess is pretty good.

I decided I was sick of my foam grips, so I ordered a set of rubber grips from JC Whitney, which will hopefully come tomorrow along with a Vista Cruise cruise control unit. That will be really nice. Took the bikes to the car wash for a quick pre-ride rinse.

Also, my dad introduced me to a bench grinder on Monday so I could polish some parts. I started with my fuse box cover, and it turned out great! The beginning product looked exactly like the cover on the left, and the finished cover is polished up nice :)



I still have a lot to do before my trip Saturday!

Shakedown Breakdown 2010

Yesterday my Dad and I went up to UNI's campus in Cedar Falls just to bum around campus and get some lunch. All was well until we left Cedar Falls and made a stop in Urbana (About halfway between Cedar Falls and Cedar Rapids) for some gas. We're quite familiar to the area, because we have some friends of the family that live there. My dad grew up with his friend Tom in Wisconsin, who eventually moved to Urbana about 30 years ago. Tom is an engineer with a knack for inventing anything out of anything, and is like MacGyver on acid (No, still cooler than MacGruber).

Before the ride, I put on the ThrottleRockers I recieved a few weeks ago to give them another shot. I rode from my house from the gas station and decided I wasn't going to use them, but on the ride up to UNI, I experienced extreme vibration (AKA "Honda Hand"), so I decided to stop and put them on in Urbana for the ride home. It's hard to gauge where to place the device on the grip,(The device needs to be placed where the throttle will be turned during highway speeds and cannot be adjusted while riding- try figuring that out at a gas station) so I asked my dad for his opinion. He fussed with it for about five seconds, then we heard a "cllliick" and then we both let out a "shiiitttttttttt". We figured that the throttle cable under the grip had broken, so we wheeled the bike over to a set of abandoned diesel pumps and busted out the tool kit and took a look at it. Sure enough, it snapped and there was no way for us to come up with an improvised fix.

Luckily, we were ten minutes from my dad's friend's place, which was well-equipped with a giant garage, bike trailer with tiedowns, a car, welding machines, any tool imaginable and a pair of helping hands. I decided to stay at the gas station with my immobile machine while my dad went down the road to his house, thinking he'd be back for me in about half an hour. Unfortunately, we found out that he was out of town and in Wisconsin for the weekend. It took us an hour to get ahold of him, but the garage was unlocked so my dad made his way in, and made a bunch of calls. Thankfully we eventually got ahold of his son Mike, who lives in Cedar Rapids and was willing to come up and help us get everything together to haul the bike back to their place.


While my dad was at their house away from the heat, I was stuck at the Urbana Casey's for three hours, with not much to do. I went in and bought a few drinks to keep hydrated in the 93-degree weather, and sat under a canopy with a nice breeze. Eventually, Mike came and picked me up and we went back to Tom's place to hook up the trailer and brought it back to the gas station to pick up the bike. Everything went smoothly; we strapped the bike to the trailer six different ways, and it survived a bumpy 3 mile gravel road. So, the bike is sitting up in Urbana somewhere right now, and will sit there for a week until we can get over to it with a new cable so I can ride it home.
The whole point of this ride was to find problems and get them fixed before we take our big trip. We had a few issues like intermittent turn signals and brake adjustments, but we certainly didn't expect this to happen. My dad carries spare cables with him all the time, but I didn't have any spares on me. He stopped into Brenny's (Our local MC dealer) this morning and ordered a new cable, which will hopefully be delivered by Saturday. While we're fortunate that we found this problem this weekend and this soon, we didn't count on arriving home at 9pm instead of 3pm.

And the worst part wasn't even the cable breaking-It was having to ride bitch on the back of my dad's bike for 75 miles to get home. "I have no shame", I kept telling myself...

O, Canada...II

eBay.

I hate eBay. I rarely ever have success on that site, but it's like a necessary evil. It's one of the best places to find parts I need for my Honda. Last year I did have some success with a lucky find- A KG luggage rack that I think we picked up for $40. A little cleaning and modding and it worked out just fine!

I'm currently looking for a set of crash bars/safety bars/highway bars/engine guards for my CX, that will protect both the bike and myself in the event of a crash or if it just got knocked over. I've lost a few bids on them so far, but they keep popping up on eBay, but are getting more expensive each time. I guess I'll just have to break down and buy them from the bidder for way more than they're worth. I need them in a month!!

Review: Throttle Rocker II.

I love my CX, and my CX loves me...well, up to 55mph. Any faster than that, and she shakes way too much. The handlebar vibration really gets to me, and I do have the liberty of letting my left hand let go of the handlebars, but not my right because I need it to control the throttle. Some days I get up and ride and my right hand extremely numb because I didn't have it positioned right or something. I eventually got over that, but sometimes it creeps up on me and ruins a large portion of my ride.

I started looking for alternatives to make the ride more comfortable (and bearable) at highway speeds, and I found the "Throttle Rocker". ($9.99 at jcwhitney.com) It's one of those "wow, why didn't I think of that?!" kind of inventions. It's a simple piece of contoured plastic that wraps around your grip and is positioned so that you can control the throttle with your wrist or pretty much any part of your hand, letting your hand raise up and stretch and get some airflow without slowing down or letting go of the throttle. I tried it out for the first time the other day and it worked awesome for about the first 15 minutes until it started slipping. My wrist started cramping up because it was in such an awkward position to keep the throttle at 55.

It came with a big fat rubber band to put over your bar to help prevent the device from slipping. I guess it would have worked nicely for grips that aren't foam like mine. With the foam you really don't need the piece of rubber to keep the Velcro from slipping; the Velcro with the foam just works out better. I'll have to test this sans-rubber trick on my next ride this weekend. I ordered one for the left too, but I don't think I'll use it because I really don't need it; I can let go of the left grip whenever I want.

One con I noticed was that it wasn't as comfortable as I thought it should have been, but that's just because I'm using the stock CX500C handlebars, that have ends that just point past the rider, not like traditional motorcycle handlebars. I think that these would be a lot more comfortable on bikes with straighter bars, like drag or Daytona bars. I could put it on the GT750 and see how that feels.

In other news, I haven't been able to work on the Suzuki lately because of school. My classes are wrapping up soon (less than a month!), so I'll be able to tinker with it fairly soon. The CX is getting a new tire mounted in the next two weeks (Just need to remove the front wheel), so I'm pretty excited about that. The Canada trip is still on for June, and I'm looking for a set of crash bars...

O, Canada...

Here's a chart of my progress, in my attempt to collect 48 states by the time I'm 35. Let's be real here; I'll probably never get Alaska or Hawaii.


Forgive my sloppy graph; I did it on MS Paint at 1AM.

Yeahhhh that's right, I'm riding into Canada this summer :D